rental led screen installation

Rental LED display installation step installation method and steps 1. Frame stitching, the outer frame of assembled LED display, that is, stitching the cutting profiles. The universal profiles on the market are mainly square and circular, but the assembly method is the same. 2. Fixed unit board Place the unit board in the framework (note that the front and back of the framework are positive on the front). At this time, the position of the back strip must be quite accurate, otherwise it must be reinstalled from the beginning. 3. After the back strips are fixed, the frame can be removed and starts installing magnets. After the magnet is installed, close the frame to allow the magnet and the back strip to suck, and the fixed work of the unit board is completed. 4. Connect the exhaust line and the upper and lower power cables 5. Fixed power supply and control card; power supply and unit board wiring, you need to pay attention to positive and negative poles. It is recommended to use SVV2*1.0 soft core wire, which is the 1 -square dual -shaped soft core wire. 6. Control card connect to the unit board line.

2023/06/01