Payment Type:L/C,T/T
Transportation:Ocean,Express
Port:SHENZHEN
Model No.: PV-3.91
Brand: PRIVA
Application: indoor
Brightness: 800 cd/m2
Warranty: 2 Years
Module Size: 250mmx250mm
Cabinet Weight: 5.6Kg
Refresh Rate: 3840Hz or 1920Hz
Power Supply: AC,100~220V
IP Grade: IP30
Service Method: front/back
Cabinet Size: 500*500mm
Productivity: 4000Sets/month
Transportation: Ocean,Express
Place of Origin: china
Supply Ability: 4000Sets/month
Certificate: ISO9001:2015/CE/FCC/CB/LVD
Port: SHENZHEN
Payment Type: L/C,T/T
Led Display or LCD display, which is better?
Simply put, LED and LCD are two different display technologies. LCD is a display screen composed of liquid crystals, while LED is a display screen composed of light-emitting diodes.
1、Display effect is different
LCD: Due to the backlight layer, it emits light by refracting light, the color saturation is not so high, the display effect is more natural, and it is not easy to be tired after long-term viewing.
LED: It can emit light by itself, and each pixel can project the light of three primary colors of red, green and blue, so the display effect is more vivid and full.
2、Different thickness
LCD: Thicker, due to the presence of the backlight layer and the liquid crystal layer, the thickness will be thicker than OLED.
LED: Light and thin, LED is very easy to make mobile phones thin, and it also provides the possibility for the emergence of bendable and foldable screens in the future.
LED: Each pixel works independently and can light up some pixels individually, so the power consumption of the Led screen will be lower.
Features of Rental Led Screen:
1.Super light weight: 5.6kg each panel, one person can finish installation, much easy and fast,cost effective.
2.Anti-Collision Design:Unique protection for all four corners.
3.Bottom Gap design:Bottom modules are above the floor and therefore can’t be damaged.
4.Installation by one person with one hand:Ergonomics handle with one-hand operation fast lock ,one person can easy and fast to assemble a hanging LED screen.
5.Full front &rear maintenance design:Magnetic connection between modules and cabinet for easier front&back maintenance,system box can be took off front&rear.
6.Modular design:Modules/cabinet frame and system box can be took off separately, much easy replace any part of them when maintaining.
7.Seamless splicing:Die-casting molding process,using high precision CNC processing, easy to achieve seamless splicing, splicing tolerance control within ±0.1mm.
Application:
Production flow: